Get Oct-2025 updated Exam 2V0-17.25 Dumps with New Questions
100% Pass Guarantee for 2V0-17.25 Exam Dumps with Actual Exam Questions
NEW QUESTION # 38
Which of the following can be configured to reduce downtime during maintenance on ESXi hosts?
- A. vMotion for migrating running VMs
- B. Enabling High Availability (HA) on the cluster
- C. Disabling Resource Pools temporarily
- D. Using DRS Maintenance Mode recommendations
Answer: A,B,D
Explanation:
Live migration via vMotion (A), HA cluster settings (B), and DRS' automated host maintenance (C) collectively minimize service disruption. Disabling Resource Pools (D) is not typically a recommended strategy for maintenance.
NEW QUESTION # 39
What are two benefits of enabling workload Management on a vSphere Cluster within a VI Workload Domain using SDDC Manager? (Choose two.)
- A. It integrates vSphere with third-party cloud providers.
- B. It integrates the vSphere supervisor with NSX Networking.
- C. It enhances the security of the vSphere cluster.
- D. It enables the use of Kubernetes for container orchestration on the vSphere cluster.
- E. It allows the deployment of traditional VMs with enhanced performance.
Answer: B,D
Explanation:
Workload Management integrates the vSphere Supervisor with NSX networking to provide Kubernetes control plane connectivity.
It enables Kubernetes-based container orchestration directly on the vSphere cluster via the Supervisor control plane.
NEW QUESTION # 40
In a stretched cluster configuration for vSAN, which network consideration is critical to prevent data inconsistency and ensure stable replication between sites?
- A. Layer 3 routing for all vSAN traffic
- B. At least 10 Gbps bandwidth for cross-site vMotion only
- C. Using ephemeral port groups on the distributed switch
- D. Sub-1 ms round-trip latency between the two data center sites
Answer: D
Explanation:
Stretched vSAN clusters typically require very low round-trip latency (often ~5ms or less, though recommended is sub-1ms for strict use cases) to maintain synchronous replication. Ephemeral port groups (A) and L3 routing for vSAN (C) are not standard best practices, and bandwidth (D) is important but the latency requirement is typically the most critical.
NEW QUESTION # 41
After Broadcom's acquisition of VMware, which of the following is a likely focus for the VMware by Broadcom solution stack?
- A. Elimination of enterprise features to reduce costs
- B. Only focusing on desktop virtualization products
- C. Enhanced hardware-software integration and scalability
- D. Complete discontinuation of the VMware product portfolio
Answer: C
Explanation:
With Broadcom's acquisition, a key focus is improved integration across hardware and software solutions, optimizing performance, scalability, and overall cloud-readiness.
NEW QUESTION # 42
Which feature of VMware Lifecycle Manager allows an administrator to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster?
- A. vSphere Auto Deploy
- B. Host Profiles
- C. Lifecycle Manager Images
- D. Update Manager Baselines
Answer: C
Explanation:
VMware Lifecycle Manager (vLCM) enables administrators to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster. These images include the ESXi version, firmware, drivers, and settings, ensuring consistency and simplifying updates and patches across all hosts in a cluster.
NEW QUESTION # 43
Which vSphere component is essential for providing persistent storage to Kubernetes workloads deployed on IaaS Control Plane?
- A. Pod Service
- B. Container Image Virtual Disks
- C. Control Plane Storage Policy
- D. vSAN
Answer: A
Explanation:
The vSphere Pod Service is essential for providing persistent storage to Kubernetes workloads deployed on IaaS Control Plane (formerly vSphere with Tanzu). It enables the integration of Kubernetes with vSphere, allowing the creation of persistent volumes and the management of storage resources for Kubernetes workloads, ensuring that they can utilize vSphere's storage capabilities like vSAN.
NEW QUESTION # 44
An administrator is troubleshooting a high CPU usage issue of the SDDC Manager VM. Access to SDDC Manager UI is exhibiting degraded performance.
What two steps should the administrator take to diagnose the issue? (Choose two.)
- A. Upgrade the vSphere version to the latest release.
- B. Login to SDDC Manager using console with root credentials, run the top command to identify any services that may be consuming high %CPU.
- C. Reconfigure the DRS settings to be more aggressive in load balancing.
- D. Review the CPU usage of the ESXi management domain hosts to identify any that are overcommitted.
- E. Reboot the SDDC Manager VM to clear any temporary issues.
Answer: B,D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
When troubleshooting high CPU usage on the SDDC Manager VM, the recommended diagnostic steps are:
Login to SDDC Manager using console with root credentials, run the top command to identify any services that may be consuming high %CPU (B): The official documentation instructs administrators to use system monitoring commands such as top or htop within the SDDC Manager appliance to determine if specific processes or services are causing elevated CPU usage. This helps pinpoint the root cause inside the VM.
Review the CPU usage of the ESXi management domain hosts to identify any that are overcommitted (D): High CPU usage within the SDDC Manager VM could also result from overall CPU contention on the physical ESXi hosts. Checking host-level CPU usage can help determine if the underlying infrastructure is contributing to the performance issue. The documentation emphasizes reviewing host resource metrics to ensure the management cluster is not overcommitted.
Other options such as rebooting the VM, upgrading vSphere, or modifying DRS settings are not recommended as initial diagnostic steps according to official guidance. Rebooting or changing configurations without proper analysis may disrupt services or not address the root cause.
NEW QUESTION # 45
An organization is integrating VMware vCenter with Active Directory (AD) to streamline user authentication. As part of this process, the administrator needs to add AD as an identity source in vCenter.
Which three steps must be performed to successfully add AD as an identity source? (Choose three.)
- A. Select 'Add Identity Source' and choose 'Active Directory (Integrated Windows Authentication)'.
- B. Enter the Domain Name and the credentials of an AD user with domain join privileges
- C. Navigate to the vCenter Single Sign-On configuration in the vSphere Client.
- D. Reboot the vCenter Server to apply the identity source settings.
- E. Configure DNS settings on all ESXi hosts to point to the AD DNS servers.
Answer: A,B,C
Explanation:
When adding AD as an identity source, you need to enter the Domain Name and provide the credentials of an AD user with domain join privileges to authenticate and add the domain.
In the vSphere Client, you need to select 'Add Identity Source' and choose the appropriate method for AD integration, which is typically 'Active Directory (Integrated Windows Authentication)'.
The process to add AD as an identity source is performed under the vCenter Single Sign-On (SSO) configuration in the vSphere Client.
NEW QUESTION # 46
Which VMware vSphere feature provides the ability to define and apply datastore capabilities to ensure virtual machines meet specific performance and availability requirements?
- A. Host Profiles
- B. Storage Policy Components
- C. Storage Policies
- D. Performance Service
Answer: C
Explanation:
Storage Policies in VMware vSphere allow administrators to define and apply specific storage requirements for virtual machines, ensuring they meet desired performance and availability standards.
These policies enable the alignment of VM storage needs with the capabilities of the underlying datastores.
NEW QUESTION # 47
An organization has experienced performance issues and requires a detailed analysis of infrastructure performance, capacity, utilization, and compliance using VMware Aria components.
What three steps should be followed to generate and analyze these reports? (Choose three.)
- A. Create custom dashboards to monitor performance metrics
- B. Use Aria Operations for Logs to correlate log data with performance
- C. Run predefined reports on capacity and utilization
- D. Access Aria Operations and navigate to the Reports section
- E. Export the reports for further analysis and compliance verification
Answer: A,B,C
Explanation:
Creating custom dashboards in Aria Operations allows administrators to visualize and monitor performance metrics specific to the organization's needs, making it easier to analyze the infrastructure.
Using Aria Operations for Logs helps correlate log data with performance issues, enabling a deeper analysis and understanding of the root causes of performance problems.
Running predefined reports on capacity and utilization provides valuable insights into how resources are being consumed, helping identify areas that need optimization or adjustment.
NEW QUESTION # 48
What is the primary purpose of configuring Role-Based Access Control (RBAC) in vCenter?
- A. To manage user access and permissions within the vCenter environment.
- B. To enable vCenter integration with external storage systems.
- C. To provide a method for vCenter to communicate with ESXi hosts.
- D. To ensure vCenter runs on multiple operating systems.
Answer: A
Explanation:
Role-Based Access Control (RBAC) in vCenter is used to define and manage user roles and permissions. It allows administrators to control who can access specific resources and perform actions within the vCenter environment. RBAC ensures that users only have access to the areas and tasks they are authorized to interact with, enhancing security and management.
NEW QUESTION # 49
In a vSphere architecture, which component primarily handles centralized management of ESXi hosts and virtual machines?
- A. VMware NSX Manager
- B. VMware vCenter Server
- C. VMware vRealize Operations
- D. VMware vSAN
Answer: B
Explanation:
VMware vCenter Server provides a centralized platform for managing ESXi hosts and VMs, including tasks like provisioning, monitoring, and configuration.
NEW QUESTION # 50
What is the primary benefit of creating a VM template in VMware vCenter?
- A. It provides enhanced network security for VMs.
- B. It simplifies the process of taking snapshots of VMs.
- C. It accelerates the deployment of VMs with predefined configurations.
- D. It enables direct physical access to the underlying hardware.
Answer: C
Explanation:
The primary benefit of creating a VM template in VMware vCenter is that it allows for the rapid deployment of virtual machines (VMs) with predefined configurations, including the operating system, installed applications, and other settings. This accelerates the process of provisioning VMs, ensuring consistency and saving time during deployment.
NEW QUESTION # 51
Which of the following features in vRealize Operations aids in optimizing a VMware environment?
- A. Predictive capacity analytics
- B. Built-in compliance checks for best practices
- C. Real-time VM-to-VM replication for backup
- D. Automated resource reclamation recommendations
Answer: A,B,D
Explanation:
vRealize Operations provides optimization capabilities like resource reclamation, compliance checks, and capacity analytics. Real-time replication (C) is not a vRealize Operations feature; vSphere Replication or other backup/DR solutions handle that functionality.
NEW QUESTION # 52
Which networking or security features within NSX might help enhance a vSphere environment?
- A. Micro-segmentation
- B. Distributed Firewall
- C. Logical switching and routing
- D. Memory compression
Answer: A,B,C
Explanation:
NSX provides micro-segmentation, a distributed firewall, and logical routing/switching capabilities to enhance security and networking. Memory compression (C) is a host-level feature unrelated to NSX.
NEW QUESTION # 53
What three steps are required to commission a new host into the SDDC Manager inventory?
(Choose three.)
- A. Delete all disk partitions on HDD/SSD.
- B. Four NIC ports with a minimum 10 Gbps speed.
- C. Manually import the host into the vCenter Server inventory and assign it to a cluster.
- D. Update the DNS records and add the host directly to the SDDC Manager appliance using the root credentials.
- E. A supported version of ESXi installed on the host.
- F. Self-signed certificate regenerated based on FQDN of host.
Answer: A,E,F
Explanation:
As documented in the official VMware Cloud Foundation Administration Guide for Host Commissioning:
A). Self-signed certificate regenerated based on FQDN of host.
Exact Extract:
"During the commissioning process, SDDC Manager regenerates a self-signed certificate for the host based on its FQDN to ensure secure communications and integration with the management domain." C). Delete all disk partitions on HDD/SSD.
Exact Extract:
"Before commissioning, all partitions must be deleted from the host's disks to allow SDDC Manager to claim storage for vSAN or other use. Failure to remove partitions can cause the commissioning workflow to fail." F). A supported version of ESXi installed on the host.
Exact Extract:
"The host must be installed with a version of ESXi that is supported by the current release of VMware Cloud Foundation. Unsupported versions will cause the commissioning operation to fail." Why Not the Other Options?
B: While having multiple 10Gbps NICs is recommended, it is not a strict commissioning requirement for all host profiles.
D: Updating DNS is necessary, but the step of "adding the host directly to SDDC Manager using root credentials" is incomplete, as SDDC Manager itself performs the addition and validation steps.
E: Manually adding hosts to vCenter is not permitted; SDDC Manager must orchestrate the entire host onboarding process.
Summary:
The three required steps to commission a new host into the SDDC Manager inventory are:
A). Regenerate the self-signed certificate based on the FQDN, C. Delete all disk partitions on HDD/SSD, F). Ensure a supported version of ESXi is installed.
These steps are explicitly outlined in the VMware Cloud Foundation host commissioning documentation.
NEW QUESTION # 54
An administrator configures a Local Content Library on vCenter Server A, enables publishing, and creates Subscribed Content Libraries on vCenter Server B and vCenter Server C using the publishing URL. However, the contents of the subscribed libraries on vCenter B and C are not synchronizing with the source library on vCenter A.
Which step should the administrator take to troubleshoot the issue?
- A. Recreate the Subscribed Content Libraries on vCenter B and C with a new publishing URL from vCenter Server A to reset the synchronization configuration.
- B. Manually export the library content from vCenter Server A and import it into the subscribed libraries on vCenter B and C to initialize synchronization.
- C. Enable bidirectional synchronization on the Content Library settings to ensure updates are propagated back and forth between vCenter Server A and the subscribed libraries.
- D. Verify that network connectivity exists between vCenter Server A and the other two vCenters, and ensure that the required ports for Content Library synchronization are open.
Answer: D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
When subscribed Content Libraries are not synchronizing with the source Local Content Library, the primary troubleshooting step, as described in the official VMware documentation, is to verify network connectivity between the source vCenter (vCenter Server A) and the subscribing vCenters (vCenter Server B and C). The administrator must ensure that all required network ports for Content Library synchronization are open and accessible. Without proper network communication, the subscribing vCenters cannot retrieve or sync content from the published library.
Other steps, such as recreating the libraries, enabling bidirectional sync, or manually importing content, do not address the core issue of connectivity and port access, which is essential for automated synchronization to function correctly.
NEW QUESTION # 55
An administrator needs to ensure that specific virtual machines within a VMware Cloud Foundation environment use storage that can tolerate at least two host failures. As resources are limited, the configuration should use the available resources as efficiently as possible.
Which three steps should be performed to configure a storage policy that meets the requirements?
(Choose three.)
- A. Reconfigure the existing Default Storage Policy in the vSphere Client.
- B. Create a new VM Storage Policy in the vSphere Client.
- C. Apply the storage policy to the target VMs.
- D. Set Failures to Tolerate to "2 failures - RAID-1 (Mirroring)" in the policy configuration.
- E. Configure the policy to use thin provisioning.
- F. Set Failures to Tolerate to "2 failures - RAID-6 (Erasure Coding)" in the policy configuration.
Answer: B,C,F
Explanation:
A new VM storage policy needs to be created in the vSphere Client to define specific requirements for the storage configuration, including tolerance for two host failures.
Once the storage policy is created, it must be applied to the specific virtual machines that require the storage configuration that tolerates two host failures.
To ensure the storage configuration tolerates two host failures efficiently, RAID-6 (Erasure Coding) is the appropriate choice. RAID-6 can tolerate two host failures while minimizing resource usage compared to other configurations like RAID-1.
NEW QUESTION # 56
Which steps or best practices can reduce the risk of configuration drift among multiple ESXi hosts in a large environment?
- A. Using Host Profiles to detect and remediate inconsistencies
- B. Applying manual network settings on each host individually
- C. Automating host deployments with vSphere Auto Deploy
- D. Keeping each ESXi host on a separate update schedule
Answer: A,C
Explanation:
Host Profiles (A) and Auto Deploy (C) standardize configurations across hosts. Staggered update schedules (B) and manual changes (D) increase the potential for inconsistencies.
NEW QUESTION # 57
An administrator is tasked with deploying a new VMware Cloud Foundation (VCF) instance.
The management domain is designed to be created with three virtual distributed switches (VDS) configured as follows:
- VDS1 - used for management and vMotion traffic
- VDS2 - used for vSAN traffic
- VDS3 - used for NSX Overlay traffic
What action would the administrator take to deploy the designed configuration?
- A. The design must be changed to ensure vSAN and NSX overlay traffic are on the same VDS.
- B. vSphere Distributed Switch Profile 2 must be selected in the VCF Deployment parameter workbook.
- C. A JSON file must be prepared with the defined configuration and used to run the bring-up process.
- D. The ESXi hosts have to be configured with twelve physical NICs to ensure redundancy.
Answer: C
NEW QUESTION # 58
Which of the following measures can help optimize memory usage in a busy ESXi host cluster?
- A. Correct sizing of VMs to avoid over-allocation
- B. Installing and enabling VMware Tools Balloon driver in the guest
- C. Using memory reservations on every VM
- D. Configuring Transparent Page Sharing (TPS)
Answer: A,B,D
Explanation:
TPS (A) deduplicates identical memory pages, the balloon driver (C) reclaims unused guest memory, and right-sizing (D) avoids over-allocation. Memory reservations on every VM (B) can cause resource contention if overused.
NEW QUESTION # 59
While deploying the first VI workload domain in a VMware Cloud Foundation (VCF) solution, which two steps will always be performed by SDDC Manager? (Choose two.)
- A. Deploy a new NSX Manager instance for the VI workload domain.
- B. Deploy an NSX Edge cluster and configure BGP routing on the T0 Gateway.
- C. Deploy and configure a new vCenter Server instance for the VI workload domain.
- D. Connect a new vCenter Server instance to the Application Virtual Network.
- E. Configure vSAN as a principal storage for the VI workload domain.
Answer: A,C
Explanation:
SDDC Manager always deploys a dedicated NSX Manager instance and a new vCenter Server for each VI workload domain during initial deployment.
NEW QUESTION # 60
......
2V0-17.25 exam dumps with real VMware questions and answers: https://www.dumpsfree.com/2V0-17.25-valid-exam.html
Today Updated 2V0-17.25 Exam Dumps Actual Questions: https://drive.google.com/open?id=16ZxBgZdOUDBWVlFfUbHUolZYe21HbANi