Updated Mar 04, 2024 300-535 Exam Dumps - PDF Questions and Testing Engine
New (2024) Cisco 300-535 Exam Dumps
Preparation Process and Training Tools
Despite the experience and knowledge you have, you should not neglect to prepare for the exam, because this process will greatly increase your chances to pass it on the first try. For this purpose, each candidate has access to a wide range of training and information tools. You can opt for training courses, books, and other options. Most students go for the following resources:
- How I Passed Automating and Programming Cisco Service Provider Solutions (300-535 SPAUTO) Exam by Rocismo Liolentz Publications
This is a good additional option for those who want to know about the exam details at first hand. The book is designed to help the individuals pass the Cisco 300-535 test on the first try and reduce their preparation time. In addition to the material regarding Service Provider network infrastructure, you will receive a valuable guide with tips, recommendations, and stories of the real test takers who have already obtained their certifications. The book is also available for ordering on Amazon.
- Implementing Automation for Cisco Service Provider Solutions (SPAUI) v1.0
This official training course that helps every individual prepare for the 300-535 exam contains essential information about implementation and automation solutions for the Service Provider network infrastructures. The trainees will learn about various programmability concepts and protocols, mechanisms, and tools needed to handle the day-to-day tasks. Also, the course includes operational data representation, concepts of network management protocols, and more. When it comes to the format, it is important to mention that this is a 3-day training option, which is led by a skilled instructor. The applicants have the option to attend it virtually or complete the e-learning program. It is important to realize that the participants are expected to possess an understanding of routing and switching processes, IOS XE, IOS XR, MPLS, VPN, and basics of network programmability.
- Network Programmability & Automation: Skills for the Next-Generation Network Engineer by Scott S. Lowe, Jason Edelman, and Matt Oswalt
The Cisco 300-535 test includes a large range of questions, so you need to be ready for them. Therefore, this guide covers most of the details of the exam content. A team of expert authors has created a valuable tool to help the network engineers and all those focused on network programmability and automation, master protocols, configuration of network devices, and operation and management of a network. More specifically, you will be learning Python programming basics, Data formats, and models, including JSON, XML, YAML, and YANG, alongside source control with git, and much more to get ready for this certification test. This edition is available on Amazon both in the digital and paperback versions.
The Cisco 300-535 exam tests the candidate’s ability to automate Cisco Collaboration solutions, such as Cisco Unified Communications Manager, Cisco Unity Connection, and Cisco Contact Center Express, among others. 300-535 exam is designed to validate the candidate’s understanding of the latest automation tools and techniques used in Cisco Collaboration solutions, including Cisco Webex Teams, Webex Meetings, and Webex Devices.
Cisco 300-535 exam is part of the Cisco Certified DevNet Professional certification program and is designed for professionals who specialize in automating and programming Cisco collaboration solutions. Automating and Programming Cisco Collaboration Solutions certification exam is meant to test the candidate's knowledge and skills in areas such as software development, network programmability, and automation. 300-535 exam is intended for professionals who have at least three to five years of experience in developing and implementing collaboration solutions.
NEW QUESTION # 25
What are two benefits of using Cisco NSO? (Choose two.)
- A. It abstracts the device adapter and complex device logic from the service logic.
- B. It can replace the CI/CD pipeline tools.
- C. It uses load balancing services for better traffic distribution.
- D. It automatically discovers all deployed services.
- E. It easily integrates into northbound systems and APIs.
Answer: A,E
Explanation:
Section: 3.0 Network Device Programmability
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKDCN-2498.pdf
NEW QUESTION # 26
Which command configures the remote peer when the Cisco IOS XR Traffic Controller is used?
- A. state-sync ipv4 192.168.0.3
- B. state ipv4 192.168.0.3
- C. peer ipv4 192.168.0.3
- D. peer-sync ipv4 192.168.0.3
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/segment-routing/ configuration/guide/b-segment-routing-cg-asr9000-62x/b-seg-routing-cg-asr9000-62x_chapter_01001.html
NEW QUESTION # 27
An engineer wants to replace the BLOCK_BAD ACL on the Cisco IOS XE router with this new content. The engineer wants to use RESTCONF for this and constructs a PUT request to the resource/restconf/data/native/ip/access-list/Cisco-IOS-XE-acl:extended=BLOCK_BAD. What must the body look like to achieve the Cisco IOS XE configuration?
Desired configutation:
ip access-list extended BLOCK_BAD
permit ip any host 192.168.20.1
deny ip any any
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 28
When implementing MPLS TE tunnels on Cisco IOS XR routers, what is the tunnel setup and hold priority value range, and which value has the highest priority?
- A. 0-63, where 63 is the highest priority
- B. 0-7, where 0 is the highest priority
- C. 0-7, where 7 is the highest priority
- D. 0-63, where 0 is the highest priority
Answer: B
NEW QUESTION # 29
Refer to the exhibit.
Which two configuration leaves in this YANG model are optional? (Choose two.)
- A. mtu
- B. oper-status
- C. last-change
- D. type
- E. enabled
Answer: A,C
NEW QUESTION # 30
Refer to the exhibit.
Which two URI entries are optional and functional in this RESTCONF URI structure? (Choose two.)
- A. api-entry
- B. operation
- C. path
- D. query
- E. fragment
Answer: C,D
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/DEVNET-1081.pdf page 25
NEW QUESTION # 31
Which statement describes the Cisco ESC core engine component?
- A. It can be configured for high availability and cluster mode.
- B. It interacts with the top orchestration layer using the REST and NETCONF/YANG NB APIs.
- C. It performs monitoring based on several monitoring methods.
- D. It manages transactions, validations, policies, workflows, VM state machines, and rollbacks.
Answer: D
NEW QUESTION # 32
Which two use cases are valid for Cisco WAN Automation Engine? (Choose two.)
- A. network controller
- B. what-if analysis
- C. deployment of SR policies
- D. device manager
- E. integration with Cisco XTC
Answer: C,E
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKSPG-2008.pdf Slide 16
NEW QUESTION # 33
Drag and drop the steps from the left into the correct order on the right to deploy an already created service into NSO. Not all options are used.
Answer:
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/LABSPG-2442.pdf
NEW QUESTION # 34 
Refer to the exhibit. After this operation, what else is needed to change the hostname of the router to IOS-XR- SJC-19?
- A. <get-config>
- B. <commit>
- C. <close-session>
- D. <confirm>
Answer: B
Explanation:
Section: 3.0 Network Device Programmability
NEW QUESTION # 35
Drag and drop the components of Cisco Network Services Orchestrator from the left onto the correct definitions on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 36
Refer to the exhibit.
Which XML output is a valid instantiation of the YANG model?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
The ncclient Python script is captured from the ncclient import manager. Which configuration on the Cisco IOS XE device is the script used to enable?
- A. router ospf 100 router-id 10.1.1.0
network 1.1.1.1 0.0.0.3 area 0 - B. router ospf 100 router-id 1.1.1.1
network 10.1.1.0 0.0.0.3 area 0 - C. router ospf 100 router-id 1.1.1.1
- D. router ospf 100
network 10.1.1.0 0.0.0.3 area 0
Answer: B
NEW QUESTION # 38
What is a key feature of YANG?
- A. reusable types and groupings
- B. JAVA compatibility
- C. error prediction
- D. use identification
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/optical/ncs1000/60x/b_Datamodels_cg_ncs1000/b_Datamodels_cg_ncs1000_chapter_00.html
NEW QUESTION # 39
Refer to the exhibit.
Which command prints out (44, 22) when this code is run on Python 3?
- A. print(swap2(22, 44))
- B. print(swap2(a, b))
- C. print(swap1(d, b))
- D. print(swap1(b, d))
Answer: D
NEW QUESTION # 40
......
Updated Verified Pass 300-535 Exam - Real Questions and Answers: https://www.dumpsfree.com/300-535-valid-exam.html
Best Way To Study For Cisco 300-535 Exam Brilliant 300-535 Exam Questions PDF: https://drive.google.com/open?id=18LdoKXQ1kP_1efmHv4jIKu80Fcb93Zmq