SAP C-TS411-2021 Real Exam Questions and Answers FREE
Exam Dumps C-TS411-2021 Practice Free Latest SAP Practice Tests
To be eligible to take the SAP C_TS411_2021 exam, candidates must have a fundamental understanding of SAP S/4HANA R&D Engineering processes and functionality. Additionally, candidates should have experience working with SAP S/4HANA R&D Engineering solutions and should be familiar with the configuration and customization of these solutions.
NEW QUESTION # 44
Which data base tables use the Product Master?
- A. Tables for Master Data Management.
- B. Tables only for Material Master.
- C. Tables only for Product Master.
- D. Tables for Product Master and Material Master.
Answer: B
NEW QUESTION # 45
Why do you need a material BOM header status?
- A. It controls the usage of the material BOM by a certain user.
- B. It controls the usage of an assembly indicator inside material BOM.
- C. It controls the usage of the material BOM items inside logistic chain.
- D. It controls the usage of the material BOM inside logistic chain.
Answer: D
NEW QUESTION # 46
Where can you create routings?Note: There are 3 correct Answers to this question.
- A. In Product Structure Synchronization
- B. In Visual Manufacturing Planner
- C. In the classic transaction or corresponding Fiori app for the Engineering Workbench (CEWB)
- D. In the classic transaction or corresponding Fiori app for Variant Configuration Modeling Environment (PMEVC)
- E. In the classic transaction or corresponding Fiori app for the creation of routings (CA01)
Answer: B,C,E
NEW QUESTION # 47
When or why do you assign production resources and tools to an operation?
- A. To provide additional components which cannot be assigned to the BOM.
- B. To map the equipment of the Work Center with production resources and tools.
- C. To make them available for operation inspection only.
- D. To make additional production resources and tools available that do not belong to the equipment of the Work Center.
Answer: D
NEW QUESTION # 48
What is the meaning of the operation number in the routing?
- A. It determines the sequence in which the operations are processed. The increment contains time buffers (float before and after production).
- B. It determines the sequence in which the operations are processed. The increment has no significance.
- C. It determines the sequence in which the operations are processed. The increment contains wait time and move time.
- D. Similar to the BOM, it is only a sort sequence. The increment has no significance.
Answer: A
NEW QUESTION # 49
Which scenarios are available with the Maintain Bill of Material app?Note: There are 2 correct Answers to this question.
- A. Attach a change order.
- B. Define Software Constraints.
- C. Display Valid From and Valid To information.
- D. Create a Version BOM.
Answer: B,D
NEW QUESTION # 50
What is the central element of the document key?
- A. Document part
- B. Document type
- C. Document version
- D. Document number
Answer: B
NEW QUESTION # 51
Which configuration process/scenario do you use for an Engineer To Order process?
- A. Sales Order (SET)
- B. Order BOM
- C. Planned/Production Order
- D. Engineering Order
Answer: B
NEW QUESTION # 52
Which item category is only available in configurable BOMs?
- A. Document item (D)
- B. Class item (K)
- C. Non-stock item (N)
- D. Variable-size item (R)
Answer: B
NEW QUESTION # 53
What is the significance of the Additional Data tab in class maintenance?
- A. It only exists for class nodes. It controls the usage in BOMs.
- B. It only exists for variant classes. It controls the use in configuration profiles.
- C. It only exists for class nodes. It controls the usage in routings.
- D. It exists for all class types. It controls the permitted object types.
Answer: A
NEW QUESTION # 54
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.
- A. Local object dependencies only
- B. Selection conditions and procedures
- C. Local and global object dependencies
- D. Selection conditions only
Answer: B,C
NEW QUESTION # 55
You work with a Plan./Production Order without BOM explosion scenario.Which information is available?Note: There are 2 correct Answers to this question.
- A. In the sales order, no information about the BOM is displayed except the routing.
- B. In the sales order, no information about the BOM and routing is displayed.
- C. In the simulation, no information about the BOM is displayed except the routing.
- D. In the simulation, information about the BOM and routing is displayed.
Answer: A,D
NEW QUESTION # 56
What controls the material BOM item category?Note: There are 2 correct Answers to this question.
- A. A negative quantity is allowed.
- B. A material number is required.
- C. A work center is required.
- D. A change number is required.
Answer: A,B
NEW QUESTION # 57
Which secure storage areas can be used inside a document info record?Note: There are 2 correct Answers to this question.
- A. SAP Database
- B. FTP File Server
- C. HTTP Content Server
- D. RFC Archive
Answer: A,C
NEW QUESTION # 58
Where can you specify a processing sequence during an assignment?
- A. Procedures
- B. Constraints
- C. Pre- and Selection Conditions
- D. Constraint Nets
Answer: A
NEW QUESTION # 59
What happens if the characteristic status is not set to Released?
- A. The characteristic cannot be assigned to a class.
- B. The characteristic can only be changed.
- C. A value of this characteristic cannot be assigned in classification of a configurable material.
- D. A value of this characteristic cannot be assigned in configuration.
Answer: D
NEW QUESTION # 60
What information does a change number header include?Note: There are 2 correct Answers to this question.
- A. Change type
- B. Change number status
- C. Object information
- D. Parameter effectivities
Answer: B,C
NEW QUESTION # 61
You define a Product Master from scratch and a pop-up becomes visible. Which data do you have to enter?Note: There are 2 correct Answers to this question.
- A. Organizational Level
- B. Industry Sector
- C. Description
- D. Product Type
Answer: C,D
NEW QUESTION # 62
You work with cross-plant and plant-specific Product Master statuses. Which status has the highest priority?
- A. The plant-plant specific status.
- B. The most restrictive status.
- C. The least restrictive status.
- D. The cross-plant status.
Answer: D
NEW QUESTION # 63
Which of the following objects can you connect with a revision level?Note: There are 2 correct Answers to this question.
- A. Material Master
- B. Classes
- C. Document
- D. Work Center
Answer: A,C
NEW QUESTION # 64
In a single-level configuration, you want to use a constraint so that if characteristic C1 has the value V1, then characteristic C2 is assigned the value V2.C1 and C2 are assigned to class (300)T_FCL00.What would be a correct complete constraint?
- A. RESTRICTION: (300)T_FCL00.C2 = 'V2' if (300)T_FCL00.C1 = 'V1'
- B. RESTRICTION: ?T_FCL00.C2 = 'V2' if ?T_FCL00.C1 = 'V1'
- C. RESTRICTION: ?C2 = 'V2' if ?C1 = 'V1'
- D. RESTRICTION: $self.C2 = 'V2' if $self.C1 = 'V1'
Answer: A
NEW QUESTION # 65
What is the easiest way to check whether a model is consistent with regard to the processing mode of the configuration profile and object dependencies?
- A. You use the Check Model function in the (VC modeling Environment PMEVC).
- B. You use the Extras function in the material configuration (Simul./ModelingCheck Model CU50).
- C. You use the Check Model function in the Simulate Configuration Models app.
- D. You use the function Inconsistent VC Models in the app Variant Configuration Overview.
Answer: A
NEW QUESTION # 66
For which applications can you define formulas inside a Work Center?Note: There are 3 correct Answers to this question.
- A. Scheduling
- B. Capacities
- C. HR assignment
- D. Costing
- E. Hierarchy
Answer: A,B,D
NEW QUESTION # 67
......
Verified C-TS411-2021 Exam Dumps Q&As - Provide C-TS411-2021 with Correct Answers: https://www.dumpsfree.com/C-TS411-2021-valid-exam.html