Sample Questions of SPM-NPM Dumps With 100% Exam Passing Guarantee
Pass Key features of SPM-NPM Course with Updated 77 Questions
NEW QUESTION # 11
You can use Device Studio to create pollers for CPU and memory?
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 12
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. Enable API polling on the APIC node
- B. Add an APIC node to NPM
- C. Enable API polling on all ACI devices
- D. View your SDN environment in Orion Maps
Answer: B,C
NEW QUESTION # 13
You inherit an environment with NPM and begin to receive High Traffic Utilization alerts from interfaces. When you view the alert, the issue is resolved. How do you modify NPM to receive fewer false alerts?
- A. Increase the status polling frequency on the problematic interfaces
- B. Configure the alert so that it resets only when traffic utilization remains high for a sustained period
- C. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
- D. Increase the statistics polling frequency on the problematic interfaces
Answer: D
NEW QUESTION # 14
Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?
- A. SMTP service on the Exchange server
- B. Mail queue length on the Exchange server
- C. Network bandwidth utilization
- D. Server component monitor status
Answer: B
NEW QUESTION # 15
How does NPM calculate capacity usage trends?
- A. Capacity forecasting widget
- B. Average calculation
- C. Volume capacity
- D. Historical data
Answer: D
NEW QUESTION # 16
You deploy a new router on your network. What should you do to ensure NPM correctly interprets SNMP traps from the device?
- A. Contact the router vendor fora firmware update
- B. Review your firewall rules to ensure the traps are not blocked
- C. Verify that NPM is using the correct SNMP community strings
- D. Update the MIB database
Answer: C
NEW QUESTION # 17
Half of your objects in a nested map are down, but the top level map is up. What is the cause?
- A. You set availability thresholds for devices to below 50%
- B. You set map status thresholds to above 50%
- C. You set map status thresholds to below 50%
- D. You set availability thresholds for devices to above 50%
Answer: C
NEW QUESTION # 18
You created a Universal Device Poller. You want to create an alert based on this custom poller. When you create the alert, you select "I want to alert on: Custom Poller." How would you identify the custom poller within the trigger condition?
- A. Using the MIB used in your UnDP
- B. Using the SNMP get type
- C. Using the Unique Name of your UnDP
- D. Using the enabled status
Answer: C
NEW QUESTION # 19
How can you extend NPM's monitoring to non-standard devices?
- A. Polling with non-standard protocols
- B. Combining licenses from different products
- C. Deploying Orion agents
- D. Using OIDs organized in MIBs
Answer: D
NEW QUESTION # 20
You need to add a new subnet of 500 devices for monitoring. What is the first step to incorporate these devices into NPM?
- A. Add the nodes using the Add Node feature in Manage Nodes
- B. Perform a Network Discovery
- C. Collect NetFlow from a core router
- D. Measure network-wide bandwidth consumption
Answer: B
NEW QUESTION # 21
Which metrics can NPM monitor on an Ethernet switch? (Choose all that apply.)
- A. Configuration changes
- B. Buffer misses
- C. Duplex mismatches
- D. CPU utilization
Answer: A,B,C
NEW QUESTION # 22
You want to create an alert that notifies you when packet loss meets or exceeds 50%, but only for a select set of nodes in your network. How do you accomplish this?
- A. Set the alert trigger evaluation to evaluate nodes to be included in the alert
- B. Set the scope of the alert to only apply to nodes to be included in the alert
- C. Create separate SWQL trigger condition for each node to be included in the alert
- D. Set an alert limitation for the nodes to be included in the alert
Answer: D
NEW QUESTION # 23
When you configure a report, you can limit access to specific users.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 24
For any node you monitor, you can use Network Discovery to automatically add child volumes or interfaces for monitoring.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 25
In which scenario is an agent the best solution?
- A. If Native GLX log file monitoring is required
- B. If hosts in distributed networks have overlapping IP addresses
- C. If you cannot allow ICMP polling on your routers
- D. If the WMI ports are already in use on Linux
Answer: A
NEW QUESTION # 26
You can make bulk changes, such as changing the polling method, to nodes.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 27
......
SPM-NPM Sample Practice Exam Questions 2024 Updated Verified: https://www.dumpsfree.com/SPM-NPM-valid-exam.html
Exam Study Guide Free Practice Test LAST UPDATED : https://drive.google.com/open?id=1UMNOCseBWrsp3kkBkXtqKCREJ4AkDz3D