Attested CTAL-TAE Dumps PDF Resource [2021]
Latest CTAL-TAE Actual Free Exam Questions Updated 41 Questions
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 17
Which of the following statements about the reuse of TAS artefacts is TRUE?
- A. Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA
- B. To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle
- C. Communications maintenance and improvements for reusing TAS artefacts are modify addressed during the design of the TAA
- D. Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces
Answer: A
NEW QUESTION 18
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for its ability to be implemented in other target test environments.
- B. Testing the TAS for ITS ability to run a shared test environment
- C. Testing the TAS for application compatibility issues in the target environment
- D. Testing the TAS for regressions due to optimization that fix non-functional issues.
Answer: A
NEW QUESTION 19
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. It is generally more difficult to automate test cases for a new feature as the development has not yet started
- B. The test automation engineer should work with the business analysts to ensure the new feature is testable
- C. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
- D. The introduction of a new feature could require updates or additions to the testware components
Answer: C
NEW QUESTION 20
Which of the following statement about the implementation of automated regression testing is FALSE?
- A. When automating regression tests, the initialization stepsset the test preconditions should be automated wherever possible
- B. When automating regression tests, consideration should be given to how much time would be saved by automation
- C. When automating regression tests, the structure of automated tests must always be the same as the corresponding manual tests
- D. When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly
Answer: D
NEW QUESTION 21
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?
- A. The ability of the SUT to prevent unauthorized access to its components or data.
- B. The ability of the SUT to perform its intended function for a specified period of time
- C. The ability to identify states, outputs, intermediate result and error messages in the SUT
- D. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
Answer: B
NEW QUESTION 22
Which of the following is NOT a technical design consideration for a TAA?
- A. The number of users for the SUT
- B. Standards and Legal requirements, e.g data privacy
- C. Data used by the SUT, e.g configuration, users
- D. Availability of interfaces for the SUT to be testable
Answer: A
NEW QUESTION 23
Consider a TAS deployed into production. The SUT is a web application and the test suite consists of a set of automated regression tests developed via GUI. A keyword-driven framework has been adopted for automating the regression tests. The tests are based on identification at low-levels of the web page components (e.g class indexes, tab sequence indexes and coordinates) in the next planned release the SUT will be subject to significant corrective maintenance (bug-fixes) and evolution (new features) Maintenance costs to update the test scripts should be as low as possible and the scripts must be highly reusable.
Which of the following statements is most likely to be TRUE?
- A. The keyword-driven framework introduces a level abstraction that is too high and makes it difficult what really happens
- B. The keyword-driven framework is not suitable, it would be better to adopt a structured-scripting approach
- C. False positive errors are likely to occur when running the automated tests on the new releases without modifying the test
- D. The total execution time of the automated regression test suite will decrease for each planned release.
Answer: B
NEW QUESTION 24
Consider a TAS associated to dynamically changing software frequent releases. Your goal is todetermine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?
- A. The time it takes to execute all the automated tests, for each new release of the SUT.
- B. The number of automated tests which fail because of a single software defect, for each new release of the SUT
- C. The code coverage achieved with the automated tests,for each new release of the SUT
- D. The number ofautomated tests requiring maintenance, for each new release of the SUT.
Answer: B
NEW QUESTION 25
What is NOT a factor in considering when you are asked to ensure an effective transition from manual to automated tests?
- A. Complexity to automate the manual test cases
- B. Correctness of test data and test cases
- C. The controllability of the SUT
- D. The look andfeel of the SUT
Answer: D
NEW QUESTION 26
Which of the following success factors for a test automation project is TRUE?
- A. Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite
- B. Automated tests must be designed to capture only the data that is strictly needed for comparing expected and actual results
- C. The test cases to be automated first must always be selected based on the number of times a test will need to be run
- D. The test cases to be automated must have a high dependency on particular data values
Answer: A
NEW QUESTION 27
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?
- A. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
- B. Verify the behavior of the whole automated test suite by running all the automated tests
- C. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify its behavior
- D. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.
Answer: A
NEW QUESTION 28
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automation regime for the tests is not yet mature.
Which of the following statements is TRUE?
- A. The test process should be radically changed to gain additional benefits from using the tool.
- B. The approach used for deployed this tool is aligned to the standard success factor for deployment
- C. The target defined for the project was inappropriate, because the automation regime for the automated tests at the end of the pilot is not yet mature.
- D. The pilot project should have been critical so that maximum benefits were delivered
Answer: B
NEW QUESTION 29
Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields (e.g text boxes).
What is the BEST recommendation for improving the TAS?
- A. Improving the architecture of the application in order to improve its testability
- B. Implementing keywords with higher level of granularity
- C. Implementing standard setup and teardown functions at test case level
- D. Adopting a set of standard verification methods for use by all automated tests
Answer: B
NEW QUESTION 30
Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
* The configuration of the TAS uses automated installation scripts
* The TAF saves the logs needed to debug errors in XML format
C)Features of the TAF not used by the automated tests have been tested
D)All the automated test cases contain the expected results
E)The TAS components are under configuration management
- A. B and c
- B. A and d
- C. A and e
- D. B and d
Answer: C
NEW QUESTION 31
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the
11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?
- A. Take a backup of the database in its current state. So It can be analyzed later
- B. Re-run the test automation suite starting from the 12thtest
- C. Re-run the test automation suite starting from the 1sttest.
- D. Return the database to a consistent state that allows subsequent test to run
Answer: A
NEW QUESTION 32
Which of the following statements BEST describe aspects of the SUT to consider when designing a TAA?
- A. All the interface of the SUT affected by the tests should be controllable by the TAA
- B. All the internal test interfaces of the SUT should be removed prior to the product release
- C. All the external test interfaces of the SUT should be removed prior to the product release
- D. All the interaction between SUT and TAS should be logged with the highest level of detail
Answer: D
NEW QUESTION 33
A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have beenasked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?
- A. Sustainability of the automated environment
- B. Frequency ofuse
- C. Maturity of the test process
- D. Complexity to automate
Answer: A
NEW QUESTION 34
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The defect density in the automation code of the regression test suite.
- B. The ratio of commands to executable statements in the automation code of the regression test suite
- C. The SUT code coverage provided by the execution of the regression test suite.
- D. The ratio of comments to executable statements in the SUT code.
Answer: A
NEW QUESTION 35
......
CTAL-TAE Certification Overview Latest CTAL-TAE PDF Dumps: https://www.dumpsfree.com/CTAL-TAE-valid-exam.html
Free CTAL-TAE Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1qtOBZO9oMAy9gHdu9dvUMI5rJjSS7j04