Pass Your EMC D-PE-FN-23 Exam with Correct 238 Questions and Answers
Latest [Jul 22, 2025] 2025 Realistic Verified D-PE-FN-23 Dumps
NEW QUESTION # 76
Why is Error Correcting Code (ECC) memory beneficial in Dell EMC PowerEdge servers?
- A. Provides a separate memory management scheme for memory operation
- B. Can repair errors without interrupting other server operations
- C. Creates redundancy by mirroring physically installed memory
- D. Can present more memory than what is physically installed
Answer: B
NEW QUESTION # 77
Based on the exhibit, which device is a Boot Optimized Storage Solution (BOSS) Controller?
- A. C
- B. D
- C. B
- D. A
Answer: D
NEW QUESTION # 78
How can an administrator determine if a Dell EMC PowerEdge server component is hot-swappable?
- A. Presence of a blue tab on the component
- B. Component is on the "HOT SWAP" list available from the LCD front panel
- C. Presence of an orange tab on the component
- D. Words "HOT SWAP" are printed on the assembly of the component
Answer: C
NEW QUESTION # 79
A customer is doing the following types of compute.
- Compute-intensive applications
- Machine learning and Artificial Intelligence
- Data Analytics
Which type of server can fulfill these requirements in a reasonable time frame?
- A. Nano Servers
- B. Data Center Scalable Servers
- C. Tower Servers
- D. Accelerated Servers
Answer: D
NEW QUESTION # 80
Based on the exhibit, which type of virtual switch is vSwitch1?
- A. Open
- B. Public
- C. External
- D. Private
Answer: D
NEW QUESTION # 81
An administrator needs to directly enter the System Setup on their Dell EMC PowerEdge server while working onsite.
What key should be used during POST?
- A. F10
- B. F12
- C. F2
- D. F11
Answer: C
NEW QUESTION # 82
Which protocol resolves IP addresses into MAC addresses?
- A. DNS
- B. STP
- C. DHCP
- D. ARP
Answer: D
NEW QUESTION # 83
A system administrator needs to configure an offsite shared mailbox across multiple users.
Which protocol should be used to avoid email loss and keep the mailbox synchronized on all clients simultaneously?
- A. POP
- B. IMAP
- C. SMTP
- D. MX
Answer: B
NEW QUESTION # 84
What items must be included when compiling server documentation?
- A. Inventory, network map, and firmware list
- B. Vendor list, network map, and action log
- C. Network map, inventory, and action log
- D. Firmware list, driver list, and service tags
Answer: C
NEW QUESTION # 85
What is an example of a dedicated server?
- A. Virtual Switch server
- B. Clustered server
- C. Secure Shell server
- D. Database server
Answer: D
NEW QUESTION # 86
A system administrator encountered an issue with the DHCP service. It stopped without any user action. Where is it possible to gather information about the problem?
- A. Performance Monitor
- B. Windows Event Log > Application
- C. Windows Event Log > System
- D. Task Manager
Answer: C
NEW QUESTION # 87
Which network operating system is capable of supporting various workloads, such as database and printer access, and is based on open source code?
- A. Oracle
- B. Linux
- C. ESXi
- D. Windows
Answer: B
NEW QUESTION # 88
An administrator installs a group of patches on their Microsoft Windows servers and all the servers start randomly rebooting. The administrator identifies the specific patch causing the reboots.
How can the administrator efficiently remove the specific patch from all affected servers at once?
- A. Log into the WSUS server and issue a rollback of every patch available
- B. Log into each server individually and remove the patch manually
- C. Log into only the important servers and remove the patch manually
- D. Log into the WSUS server and issue a rollback of the patch causing the issue
Answer: D
NEW QUESTION # 89
An architect received the requirements for a low-budget development server. The applications on the server are not performance sensitive, but the customer would like some level of data protection.
Which storage solution fits these requirements?
- A. Software RAID 10
- B. Software RAID 5
- C. Hardware RAID 10
- D. Hardware RAID 5
Answer: B
NEW QUESTION # 90
Which RAID level is recommended for high speed data access and maximum storage capacity?
- A. RAID 0
- B. RAID 1
- C. RAID 6
- D. RAID 5
Answer: A
NEW QUESTION # 91
What is the minimum number of hard disks required in a RAID 10 configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 92
A company is planning a physical security solution for its branches worldwide.
Which danger are they trying to avoid?
- A. Buffer Overflow
- B. Phishing
- C. Ransomware
- D. Asset vandalism
Answer: D
NEW QUESTION # 93
What tasks can be performed on a Dell PowerEdge server using in-band management?
- A. LCD Readings, Cooling changes, Storage performance settings, and OCP
- B. Memory installation, CPU tweaking, BIOS setup, iSM installation
- C. User Protection, Backlog application, OS Installation, and Backlog review
- D. Firmware Updates, Alerts, Messaging, and Inventor
Answer: D
NEW QUESTION # 94
A system administrator is installing Hyper-V on a Windows Server 2016. They receive an error message.
How can they solve the problem?
- A. Check the installed processor is x86
- B. Confirm essentials license is installed
- C. Ensure minimum memory of 2 GB
- D. Verify that the virtualization feature is enabled
Answer: B
NEW QUESTION # 95
What server types offer more disk drives and expansion slots and are the most cost effective within the Dell portfolio?
- A. Tower Servers
- B. Nano Servers
- C. Blade Servers
- D. Rack Servers
Answer: A
NEW QUESTION # 96
An MX7000 was purchased with minimal configuration.
What can an administrator add to make the MX7000 management interface fully redundant?
- A. MX9116n module
- B. MX9002m module
- C. Enterprise license
- D. CMC module
Answer: B
NEW QUESTION # 97
A backup administrator is migrating their tape drive backup solution from LTO-4 to LTO-6 generation.
Both LTO-3 and LTO-4 media are presently in use. All LTO-4 drives are to be replaced by LTO-6 drives, but the administrator plans to avoid replacing a maximum amount of the tapes already in use.
What should the administrator do to accomplish this task?
- A. Nothing, the administrator will still be able to read any tape currently in use will their LTO-6 drive and will be able to retrieve data if needed
- B. Back up all critical data on at least LTO-4 tapes in order to be read it from their new LTO-6 drives.
- C. Back up all critical data from LTO-3 tapes to LTO-4 tapes
Next, back up LTO-4 tapes to LTO-5 tapes - D. Back up all critical data from LTO-3 tapes to LTO-4 tapes
Next, back up LTO-4 tapes to LTO-5 tapes
Next, back up LTO-5 tapes to LTO-6 tapes
Answer: B
NEW QUESTION # 98
......
Get 2025 Updated Free EMC D-PE-FN-23 Exam Questions and Answer: https://www.dumpsfree.com/D-PE-FN-23-valid-exam.html