Pass NS0-176 Exam - Real Test Engine PDF with 141 Questions
Get New NS0-176 Certification Practice Test Questions Exam Dumps
NEW QUESTION 26
Your primary VSM needs to be edited, rebooted, or migrated. You need to initiate a manual switchover to your standby VSM.
What command will allow this to occur?
- A. System switchover
- B. Standby activate
- C. System standby
- D. vsm switchover
Answer: A
NEW QUESTION 27
An administrator has a FlexPod solution with VMware vSphere 6.0. The VMware environment is using FCoE for storage connectivity for datastores.
Virtual machines running Windows Server 2012 R2 and RHEL have a requirement to use RDM LUNs for virtual machine storage. The administrator created an RDM LUN for a Windows 2012 R2 virtual machine and is currently creating an initiator group to map the LUN.
In this situation, which operating system should the administrator select for the initiator group?
- A. Open VMS
- B. Linux
- C. VMware
- D. Windows
Answer: D
NEW QUESTION 28
An administrator has a Flexpod solution configured to use VMware vSphere 6.0. All virtual machines will reside on NAS datastores. Certain critical virtual machines have a requirement to use eager-zeroed thick provisioning.
In this scenario, which VMware capability should the administrator enable to satisfy the performance requirement?
- A. datastore clustering
- B. NetApp NFS VAAI
- C. VMware VMFS VAAI
- D. Storage I/O Control
Answer: C
NEW QUESTION 29
What is the correct flow control setting for the intercluster ports on a NetApp cluster?
to 50% cashback.
- A. switched cluster = none switchless cluster = full
- B. switched cluster = full switchless cluster = none
- C. switched cluster = set to match the setting on switch port switchless cluster = none
- D. switched cluster = none switchless cluster = none
Answer: C
NEW QUESTION 30
Your customer has the storage configuration for a FlexPod solution shown below.
- FAS8040 HA-pair
- Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
- Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
- There are no unused SAS ports on either controller
- There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
- A. Cable a new stack for the SSD shelf.
- B. Cable the new shelf to the end of stack one.
- C. Cable the new shelf to the end of stack two.
- D. Cable the new shelf to the beginning of stack two.
Answer: A,D
NEW QUESTION 31
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
- A. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
- B. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
- C. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
- D. HA pairs in the same chassis are not connected to each other through an HA interconnect.
Answer: B,C
NEW QUESTION 32
Which set of commands maps VLAN 100 to VSAN 100?
- A. Nexus 5000-A#configure terminal Nexus 5000-A (config) # vlan 100 Nexus 5000- A (config-vlan_ #fcoe vsan 100
- B. Nexus 5000-B# configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-B (config-vsan)# vsan 100 Nexus 5000-B(config- vsan) #vsan 100 name FCoE-VLAN 100
- C. Nexus 5000-A#configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-A (config)# vsan 100 Nexus 5000-A (config-vsan) # fcoe vsan 100
- D. Nexus 5000-B# configure terminal Nexus 5000-B(config-vsan) # vlan 100 Nexus 5000-B (config-vsan)# vsan 100 name vsan100
Answer: A
NEW QUESTION 33
When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?
- A. Zonesets should be created.
- B. IQN and IP address of target.
- C. All zoning should be configured.
- D. WWPN Pools.
Answer: B
NEW QUESTION 34
Exhibit:
An iSCSI SAN boot is not working for a new Cisoc UCS service profile. The new vNIC template was created using the settings shown in the exhibit.
What should you do to make iSCSI SAN boot work?
- A. Set the iSCSI-A-VLAN as the "Native VLAN".
- B. Change the vNIC template to type "Initial Template".
- C. Change the MAC pool to "<not set>".
- D. Specify a QoS policy.
Answer: D
NEW QUESTION 35
Which server role is required to support running virtual machines on a Microsoft based hypervisor?
- A. Web Server
- B. Hyper-V
- C. Application Server
- D. Remote Access
Answer: B
NEW QUESTION 36
The NetApp Vistual Storage Console is used to set which three setting categories on ESXi hosts? (Choose three.)
- A. Logging Settings
- B. MPIO Settings
- C. Adapter Settings
- D. NFS Settings
- E. Security Settings
Answer: B,C,D
NEW QUESTION 37
Which two are correct about VSAN configuration within UCS Manager? (Choose two)
- A. VSAN IDs 3840-4079 are not available regardless of the Fabric Interconnect mode.
- B. In addition to SAN tab, VSANs can be configured under UCSM Server tab as well.
- C. VSAN ID and FCoE VLAN ID have to match.
- D. VSAN can be configured as fabric interconnect specific.
- E. VSAN can be configured as a global parameter.
- F. We can delete VSAN 1.
Answer: D,F
NEW QUESTION 38
You are attempting to establish a cluster peer relationship between two NetApp clusters, but the peering process fails.
What is a cause for this failure?
- A. The cluster LIFs on each node cannot communicate with the cluster LIFs on each node in the peer cluster.
- B. The intercluster LIF on each node cannot communicate with the intercluster LIF on each node in the peer cluster.
- C. The cluster management LIF for the cluster cannot communicate with the cluster management LIF for the peer cluster.
- D. The node management LIF on each node cannot communicate with the node management LIF on each node in the peer cluster.
Answer: B
NEW QUESTION 39
Which two are two possible features of the 'Call Home' feature in UCS Manager?
- A. Generates a syslog event
- B. Ability to proactively open a case with the Cisco TAC with the 'Smart Call Home' feature
- C. Generates a text message to configured cell phone numbers
- D. Generates emails to predefined email addresses when a problem is detected
- E. Allows UCS to proactively pull down new software updates from Cisco
Answer: B,D
NEW QUESTION 40
What determines the size of the .vswap file for a VMware VM?
- A. the amount of RAM assigned to the VM minus the amount of RAM reserved
- B. the RAM assigned to the VM
- C. the size of the RAM plus the log file
- D. the total amount of RAM used by the ESXi host
Answer: A
NEW QUESTION 41
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Trunk
- B. Edge trunk
- C. Edge
- D. Normal
- E. Network
Answer: B
NEW QUESTION 42
VMware ESXi 6 supports which three storage protocols? (Choose three.)
- A. CIFS
- B. iSCSI
- C. NFS
- D. FCP
- E. SMB
Answer: A,B,D
NEW QUESTION 43
Given the following switch output, where would you expect see notification level messages?
N5K-1# show logging info.
Logging console: enabled (Severity: error)
Logging monitor: enabled (Severity: informational)
Logging linecard: enabled (Severity: emergency)
Logging fex: enabled (Severity: notifications)
Logging time stamp: seconds
Logging server: disabled
Logging logfile: enabled
- A. On the linecard
- B. Notification messages will not be seen anywhere
- C. On the console
- D. On the terminal sessions
Answer: D
NEW QUESTION 44
Which three are characteristics of a NAS data LIF? (Choose three.)
- A. It can be associated with a WWPN
- B. It can be associated with an IP address.
- C. It can be associated with an interface group (ifgrp).
- D. It can be associated with an Ethernet port or VLAN interface.
- E. It is associated with the administrative Vserver.
- F. It is associated with the management LIF.
- G. It can be associated with a Fibre Channel port.
Answer: B,C,D
NEW QUESTION 45
An administrator has a FlexPod solution configured for Microsoft Hyper-V 2012 R2. The hypervisor will be using CIFS shares for Cluster Shared Volume (CSV) datastores. A storage virtual machine (SVM) is configured, and a CIFS share is created for use.
When attempting to add the CSV datastore to the CIFS share, an error occurs and the datastore is not created.
Which three steps should the administrator perform to solve the problem? (Choose three.)
- A. Enable the "Continuous Availability" setting on the CIFS share.
- B. Configure the export policy with the Hyper-V host IP address.
- C. Configure the "Enable Oplocks" setting on the CIFS share.
- D. Create multiple LIFs for CIFS Hyper-V traffic to enable ALUA.
- E. Configure the ~-smb3-enabled~ parameter on the SVM.
Answer: B,C,E
NEW QUESTION 46
When installing an instance of VMware ESXi on a UCS B-Series server, where should an ISO image be loaded?
- A. Only physical install disks are supported on UCS B-Series servers
- B. ISO images should not be used
- C. From the UCS Manager select KVM Console, Select the Virtual Media tab, and select Add Image
- D. The UCS vCenter Plugin must be used
Answer: C
NEW QUESTION 47
......
NS0-176 Exam Dumps - PDF Questions and Testing Engine: https://www.dumpsfree.com/NS0-176-valid-exam.html