CheckPoint 156-835 Real Exam Questions Guaranteed Updated Dump from DumpsFree
Verified Pass 156-835 Exam in First Attempt Guaranteed
CheckPoint 156-835 (Check Point Certified Maestro Expert) Exam is a certification exam designed for professionals who want to validate their expertise in deploying and managing Check Point Maestro, a network orchestration solution. 156-835 exam is intended for experienced IT professionals who have a strong understanding of networking, security technologies, and the ability to deploy and manage complex network infrastructures.
NEW QUESTION # 12
Which file on Appliance includes information about Security Group?
- A. /etc/distutiljson
- B. /etc/chassisdb.json
- C. /etc/sgdb.json
- D. /etc/smodb.json
Answer: C
NEW QUESTION # 13
What is the Sync network on Appliances used for?
- A. May be used for any purpose, but synchronization always have priority
- B. To transfer data in case of full utilization of the downlink interfaces
- C. To transfer configuration files from Orchestrators to Appliances
- D. To synchronize configurations and connections in between connection tables of different Appliances
Answer: D
NEW QUESTION # 14
What does the lldpctl command do?
- A. Show all devices discovered by LLDP protocol on all ports
- B. Show all devices discovered by LLDP protocol on uplink ports
- C. Show all devices discovered by LLDP protocol on downlink ports
- D. Discover orchestrators
Answer: A
NEW QUESTION # 15
What kinds of transceivers are supported on Orchestrator MHO-170?
- A. QSFP. QSFP28
- B. SFP. SFP+. SFP28
- C. SFP. QSFP, QSFP28
- D. SFP+, SFP28. QSFP
Answer: A
NEW QUESTION # 16
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?
- A. 2M
- B. 1M
- C. 500K
- D. 4M
Answer: A
NEW QUESTION # 17
What is the maximum amount of Appliances within the same Security Group?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 18
What is a downlink interface used for?
- A. To connect appliances to customer's infrastructure
- B. To connect appliances to Orchestrators
- C. To connect in between Orchestrators
- D. To connect Orchestrators to customer's infrastructure
Answer: B
NEW QUESTION # 19
Complete the sentence: When using a Break-out cable...
- A. Each tail of the break-out cable represent an independent port
- B. All tails of the break-out cable must represent downlinks
- C. All tails of the break-out cable must represent the same type of ports
- D. All tails of the break-out cable must represent uplinks
Answer: A
NEW QUESTION # 20
In order to set Site (chassis) priority per VS, following command should be used:
- A. From any VS context: set chassis high-availability vs <vsid> chassis_priority
- B. From VSO context: set chassis high-availability vs <vsid> chassis_priority
- C. From given VSO context: set chassis high-availability vs chassis_priority
- D. From given VS context: set chassis high-availability vs chassis_priority
Answer: C
NEW QUESTION # 21
What is the distribution mode?
- A. Distribution mode means selected algorithm for traffic distribution in between Appliances
- B. Distribution mode means selected algorithm for traffic distribution in between Orchestrators
- C. Distribution mode is how the Orchestrator distributes traffic in between Security Groups
- D. Distribution mode is the same as QSFP mode
Answer: A
NEW QUESTION # 22
What is an uplink interface used for?
- A. To connect in between appliances
- B. To connect appliances to customer's infrastructure
- C. To connect in between Orchestrators
- D. To connect Orchestrators to customer's infrastructure
Answer: B
NEW QUESTION # 23
On MHO-170 - In default configuration, what are GAIA names of Security Group Management ports?
- A. eth1-Mgmt1 and eth1-Mgmt3
- B. eth1-Mgmt3 and eth1-Mgmt4
- C. eth1-Mgmt1 and eth1-Mgmt2
- D. eth1-Mgmt1 and eth2-Mgmt1
Answer: A
NEW QUESTION # 24
There's a 23800 appliance with quad NIC in slot 5. What would be the name of port 3 on this NIC?
- A. ethsBP-05
- B. ethBP3-05
- C. ethsBP3-05
- D. ethsBP5-03
Answer: D
NEW QUESTION # 25
Complete the sentence: Orchestrators works as...
- A. Active-Active cluster
- B. Load Sharing cluster
- C. Hot-Swap RAID
- D. Active-Standby cluster
Answer: A
NEW QUESTION # 26
Where should sx_api_ports_dump,py command be ran?
- A. Orchestrator
- B. Management server
- C. SMO Appliance
- D. Security Group
Answer: A
NEW QUESTION # 27
What is the Iterator process?
- A. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- B. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- D. Iterator is the process that simulates distribution in case of Appliance failure
Answer: C
NEW QUESTION # 28
When running asg perf -v in a Dual-Site environment, we can see only Appliances from one of the sites. That means we're working in:
- A. VSLS mode
- B. Active / Standby HA mode
- C. This is not Dual-Site, in Dual-Site we always see Appliances from both sites
- D. Active /Active
Answer: B
NEW QUESTION # 29
......
Download Real CheckPoint 156-835 Exam Dumps Test Engine Exam Questions: https://www.dumpsfree.com/156-835-valid-exam.html
Free 156-835 Sample Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=1jFcc-0RU-rO8_oiMeorlwtC1dPXGj_u-