300-815 Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling 300-815 Exam Dumps 2025 Newly Released
Cisco 300-815 certification exam is ideal for IT professionals who work with Cisco Unified Communications Manager and want to expand their knowledge and skills in advanced call control and mobility services. Implementing Cisco Advanced Call Control and Mobility Services certification is also beneficial for individuals who want to demonstrate their expertise to potential employers and advance their career in the field of IT.
NEW QUESTION # 92
An administrator has a requirement that the agents that receive calls from PSTN now must have a queue to hold the calls until they can be answered, but the customer cannot afford a contact center solution. The administrator discovered a feature called Native Call Queueing on Cisco UCM. Where must the administrator configure Native Call Queueing functionality?
- A. hunt pilot
- B. hunt group
- C. hunt list
- D. CTI route point
Answer: A
NEW QUESTION # 93
Refer to the exhibit. An engineer is troubleshooting an issue where inbound Calls are failing after they transferred. The provider reports that update is not supported, and this is causing the calls to fail. Which command should resolve this issue?
- A. no contact-passig
- B. no update-callerId
- C. rel1xx require "100rel"
- D. no midcall-signaling passthru
Answer: B
Explanation:
The exhibit shows a SIP message from a caller named "Amy" to a caller named "Bob". The message contains an "UPDATE" request, which is used to modify the caller ID of an existing call.
However, the provider does not support the UPDATE message, so the call is failing.
The no update-callerId command will disable the sending of UPDATE messages. This will resolve the issue, as the call will no longer be failing due to the unsupported message.
NEW QUESTION # 94
A company with only 15 users needs to have a phone system without deploying dedicated servers for this purpose. Using the local Cisco router with Cisco UCME capabilities, which configuration is needed to support SIP phones?
- A. voice-register SIP
- B. voice-register pool
- C. ephone
- D. voice-register ephone
Answer: C
NEW QUESTION # 95
An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks.
Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)
- A. Add the long-distance & international pattern's partitions to the calling search space of the device profile
- B. Remove the long-distance & international pattern's partitions from the calling search space of the device profile.
- C. Remove the long-distance & international pattern's partitions from the calling search space of the physical phone's directory number.
- D. Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.
- E. Add the long-distance & international pattern's partitions to the calling search space of the physical phone.
Answer: A,C
NEW QUESTION # 96
An engineer has temporarily disabled toll fraud prevention for SIP line calls on a Cisco CME12.6x and must enforce security and toll fraud prevention for the SIP line side on Cisco Unified CME.
Which configuration must be used to start this process?
- A. voice service voip
ip address trusted list - B. voice service voip
ip address trusted authenticate - C. voice service voip
enablo ip address trust authentication - D. voice service voip
enable ip address trust list
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmead m/cmetoll.html
NEW QUESTION # 97
A network engineer designs a new dial plan and wants to block a certain range of numbers (8135100 through 8135105). What is the most specific route pattern that can be configured to block only the numbers in this range?
- A. 81XXXXX
- B. 813510[012345]
- C. 813510[^0-5]
- D. 813510[12345]
Answer: B
NEW QUESTION # 98
How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?
- A. At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.
- B. At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.
- C. At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.
- D. At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.
Answer: A
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 99
Refer to the exhibit.
Refer to the exhibit. A company is using Microsoft Teams with Cisco Unified Border Element integration, but the administrator sees a one-way audio issue with Microsoft Teams. The administrator must modify the SIP profile to send the proper information on the SDP for IP address for media to match the internal and external interface. Which set of commands resolves the issue?
- A. voice class sip-profiles 1
request INVITE sdp-header Session-Owner modify "27\.0\.0" "27.3.0" - B. voice class sip-profiles 1
request INVITE sdp-header Audio-Attribute modify "2\.76\.1" "2.71.1" - C. voice class sip-profiles 1
request INVITE sdp-header Connection-Info modify "2\.76\.1" "2.78.1" - D. voice class sip-profiles 1
request INVITE sdp-header Connection add "2\.76\.1" "2.78.1"
Answer: D
NEW QUESTION # 100
An SRST site must use pickup functionality on the Chicago remote site to allow the users to take incoming calls. The pickup command is configured under the call manager-fallback section on the SRST router. What are two results of that configuration? (Choose two.)
- A. The PickUp soft key is on all SRST phones.
- B. Calls that come into one directory number can be picked up from another directory number.
- C. The GPickUp soft key is on all SRST phones.
- D. Calls that ring an unassigned directory number are forwarded to the auto-attendant.
- E. Calls that come into a Cisco UCM registered phone can be picked up by a SRST phone.
Answer: A,B
NEW QUESTION # 101
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. session-protocol sipv2
- B. incoming called number 555.......
- C. answer-address 555 ........
- D. codec g729
Answer: A
NEW QUESTION # 102
A user's phone is already configured for Single Number Reach, and the user wants a feature to move an active call from a mobile phone to a desk phone and vice-versa. As an administrator, which additional configuration should be made to fulfill the user's request?
- A. Confirm that the desk phone is subscribed to Cisco Extension Mobility.
- B. Check to make sure that the Resume softkey option appears on the desk phone.
- C. Use Dialed Number Analyzer to determine if the user extension can dial the mobile phone.
- D. Add the mobility key to the softkey template that the desk phone is using.
Answer: D
Explanation:
Step 11 Configure a Mobility softkey for the phone user that uses Cisco Unified Mobility.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_ F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_0110111.html
NEW QUESTION # 103
In Cisco Unified Communications Manager, which tool do you use to check SIP traces?
- A. OS Administration Page
- B. CCSIP
- C. RTMT
- D. MTP
Answer: C
NEW QUESTION # 104
Refer to the exhibit.
A Cisco Unified Border Element continues to send 180/183 with the required: 100rel header to Cisco UCM. and the call eventually disconnects How is the issue resolved?
- A. Enable *Early Offer support for voice and video calls" on the SIP Profile Configuration Page in Cisco UCM.
- B. Disable "SIP Rel1XX Options* and 'Early Offer Support* on the SIP Profile Configuration Page m Cisco UCM.
- C. Disable "Send send-receive SDP in mid-call INVITE* on the SIP Profile Configuration Page in Cisco UCM.
- D. Enable 'SIP ReI1XX Options* and -Early Offer Support" on the SIP Profile Configuration Page in Cisco UCM.
Answer: A
NEW QUESTION # 105
Refer to the exhibit. An engineer is troubleshooting an issue with the caller not hearing a PSTN announcement before the SIP call has completed setup.
How must the engineer resolve this issue using the reliable provisional response of the SIP?
- A. sip-ua
disable-early-media 180 - B. voice service voip
sip
no reMxx - C. voice service voip
sip
send 180 sdp - D. voice service voip
sip
rehxx require 100rel
Answer: D
NEW QUESTION # 106
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. CTI route points
- B. CTI ports
- C. IP phones
- D. device pools
- E. translation patterns
Answer: B,C
Explanation:
Section: Call Control and Dial Planning
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/11_5_1/ CUCM_BK_CBA47A6E_00_cucm-dna-guide-115/CUCM_BK_CBA47A6E_00_cucm-dna-guide-
115_chapter_01.html#CUCM_TP_A5DA99E0_00
NEW QUESTION # 107
An organization has decided to implement hunt groups to help with the distribution of calls between different members. The administrator must configure hunt groups on Cisco UCM. In the configuration, at which step does an administrator have the option to configure a distribution algorithm (top down, circular, longest idle time, broadcast)?
- A. hunt group
- B. line group
- C. hunt list
- D. route list
Answer: C
NEW QUESTION # 108
Calls are not working when sent from a Cisco Unified Border Element to a service provider. After investigating the logs, the engineer notes that the Cisco Unified Border Element is sending the extension only. How is the issue addressed in the configuration?
- A. voice class request sip-header diversion
- B. voice class request sip-header modify
- C. sip-header contact modify
- D. request invite sip-header diversion modify
Answer: D
NEW QUESTION # 109
Refer to the exhibit.
Refer to the exhibit. A standard local route group is configured for long-distance calls. Calls from building A succeed, but calls from building B fail. On the system. Each building has is own device pool. The DNA tool is used to test the configuration. How is this issue resolved?
- A. Modify the route pattern to add a prefix of 91
- B. Add a local route group on the device pool configuration.
- C. Change the partition of the route pattern
- D. Add a sip trunk inside route group Standard Local Route Group.
Answer: B
NEW QUESTION # 110
An engineer has a hunt group with some overflow and many calls are going to voicemail. To reduce the number of calls forwarded to voicemail, the engineer must create Call Queuing to make callers wait before going to voicemail. How will Call Queuing affect Forward Hunt No Answer and Forward Hunt Busy?
- A. Alter Call Queuing is enabled, Forward Hunt No Answer and Forward Hunt Busy must be disabled manually.
- B. When Call Queuing is enabled, Forward Hunt No Answer and Forward Hunt Busy are disabled automatically.
- C. Before Call Queuing is enabled, Forward Hunt No Answer and Forward Hunt Busy must be disabled manually.
- D. Forward Hunt No Answer and Forward Hunt Busy must be enabled while Call Queuing is enabled.
Answer: B
NEW QUESTION # 111
Users report that calls to some locations do not work. The phone is calling, the recipient picks up, but it does not connect. These users are in the headquarters and registered to the company Cisco UCM with default values for calling (G.711). The problem locations are smaller remote locations with low bandwidth capacity, so the phones are configured with iLBC.
Which command should be used to troubleshoot the issue?
- A. show dspfarm dsp active
- B. debug voice dspfarm
- C. show dsp active
- D. debug dsp all
Answer: A
NEW QUESTION # 112
Refer to the exhibit.
Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?
- A. rule 1 /^/+\([^1].*\)/ /011\1/
- B. rule 1/^\+1\([2-9]..[2-9]......$\)/ /\1/
- C. rule 1 /^\([2-9]..[2-9]......$\)/ /\1/
- D. rule 1 /^\+1\([2-9]..[2-9]......$\)/ /\0/
Answer: B
NEW QUESTION # 113
Refer to the exhibit.
Users report that when they dial to Cisco Unity Connection from an external network, they cannot enter any digits. Assuming only in-band DTMF is supported, what is a reason for this malfunction?
- A. There is SIP Delayed Offer. DTMF is supported only in Early Offer.
- B. The rtpmap:0 value for the negotiated codec is marking DTMF as inactive.
- C. The negotiated RTP port is outside of the range described by RFC, so inband DTMFs do not work.
- D. No DTMF is negotiated.
Answer: D
NEW QUESTION # 114
An IP Telephony administrator is deploying IP phones The administrator has an existing Cisco UCME router with several SCCP & SIP phones registered. The administrator receives a request for a new SIP phone with MAC address 1111 2222.3333 and directory number 2050 to be added in the Cisco UCME. Which two configurations should be added in CME to support this request? (Choose two )
- A. Option D
- B. Option B
- C. Option E
- D. Option A
- E. Option C
Answer: A,E
NEW QUESTION # 115
An engineer is configuring the Extension Mobility feature on Cisco UCM and has created the phone service by setting the service name, URL, and service type.
What is the next step in the configuration?
- A. Subscribe to Extension Mobility
- B. Create an Extension Mobility device profile for users
- C. Configure the change credential IP phone service
- D. Associate a device profile to a user
Answer: B
NEW QUESTION # 116
......
Get 100% Authentic Cisco 300-815 Dumps with Correct Answers: https://www.dumpsfree.com/300-815-valid-exam.html
New Training Course 300-815 Tutorial Preparation Guide: https://drive.google.com/open?id=10yGo1CFacOX5kYAPXE74sdDWKmzyv_PG