If you care about Cisco Implementing Cisco IP Switched Networks exam you should consider us DumpsFree. Our 642-813 dumps take the leading position in this area. Some candidates know us from other friends' recommendation or some know us from someone's blog or forum. You may download our 642-813 dumps for free first. From our dumps free download you will find our exam dumps are really valid and high-quality. Our 642-813 dumps VCE guarantee candidates pass exam 100% for sure. If you choose us, you will not be upset about your CCNP Implementing Cisco IP Switched Networks exams any more.
642-813 dumps PDF & 642-813 dumps VCE, which?
642-813 dumps PDF file is downloadable and is able to print out as hardcopy. Some candidates like study on paper or some candidates are purchase for company, they can print out many copies, and they can discuss & study together in meeting. We provide you 642-813 dumps free download.
642-813 dumps VCE is more popular actually. The number of purchasing dumps VCE is far more than the dumps PDF especially the online test engine. Dumps VCE can not only provide the exam dumps materials but also it can simulate the real test scene. You can set the time and mark way just like the real test. So that you can not only master the questions & answers of 642-813 exam dumps, study performance after studying but also you can improve the answer speed, keep a good & casual mood while the real test. If you test wrong answers of some questions on 642-813 dumps VCE, the test engine will remind you to practice every time while operating. If some questions are answered correctly every time you can set to hide them. If more details you can try to download 642-813 dumps for free and if you have any questions you can contact with us at any time.
We not only provide the leading high-quality products which guarantee you pass exam 100% for sure, but also good service
Firstly, as we said before we are a strong company providing the leading high-quality 642-813 dumps VCE which the pass rate is high up to 96.17% based on the past five years' data. We guarantee all candidates pass Cisco Implementing Cisco IP Switched Networks if you trust us and study our 642-813 dumps VCE carefully. We assist about 100000+ candidates to pass exams every year. We can always get information about 642-813 from Cisco official at the first moment once the 642-813 exam changes. We have great relationship with most of largest companies. We pay much money for the information sources every year. We guarantee all 642-813 dumps VCE we sell out are the latest, valid and accurate. We are being followed by many companies but never surpassed.
Secondly, our service is 7*24 online working including official holidays. We deal with all message & emails about exam dumps in two hours. We send you the 642-813 dumps VCE in 15 minutes after your payment. If you have questions about downloading the 642-813 dumps for free, the payment, the pass rate and the update date of exam dumps we are pleased to serve for you. We keep your information safety, we guarantee 100% pass Cisco Implementing Cisco IP Switched Networks exam. If you fail the exam with our 642-813 dumps VCE sadly we will full refund you in 2-7 working days.
9000 candidates choose us and pass exams every year, why are you still hesitating? Come and choose us, 642-813 dumps VCE will be your best helper.
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Cisco 642-813 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Inter-VLAN Routing | - Router-on-a-stick configuration - Layer 3 switch routing |
| Switch Security | - DHCP snooping and Dynamic ARP Inspection (DAI) - Storm control and mitigation techniques - Port security configuration |
| Spanning Tree Protocol (STP) | - PVST+ and Rapid PVST+ - Root bridge selection and optimization - STP operation and convergence |
| VLANs and Trunking | - VTP (VLAN Trunking Protocol) configuration and troubleshooting - 802.1Q trunking and inter-switch connectivity - VLAN creation, management, and verification |
| EtherChannel | - LACP and PAgP configuration - Load balancing and redundancy |
| Infrastructure Services and Troubleshooting | - Troubleshooting VLAN, STP, and connectivity issues - Switch management (SSH, Telnet, SNMP) |
Cisco Implementing Cisco IP Switched Networks Sample Questions:
Refer to the exhibit.
Which two sets of procedures are best practices for Layer 2 and 3 failover alignment? (Choose two.)
- A. Configure the D-SW2 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW1 switch as the standby HSRP router and backup STP root for all VLANs.
- B. Configure the D-SW1 switch as the standby HSRP router and the backup STP root for VLANs 12 and 120. Configure the D-SW2 switch as the standby HSRP router and the backup STP root for VLANs 11 and 110.
- C. Configure the D-SW1 switch as the active HSRP router and the backup STP root for VLANs 11 and 110. Configure the D-SW2 switch as the active HSRP router and the backup STP root for VLANs 12 and 120.
- D. Configure the D-SW1 switch as the active HSRP router and the STP root for VLANs 11 and
110. Configure the D-SW2 switch as the active HSRP router and the STP root for VLANs 12 and
120. - E. Configure the D-SW1 switch as the standby HSRP router and the STP root for VLANs 11 and
110. Configure the D-SW2 switch as the standby HSRP router and the STP root for VLANs 12 and
120. - F. Configure the D-SW1 switch as the active HSRP router and the STP root for all VLANs. Configure the D-SW2 switch as the standby HSRP router and backup STP root for all VLANs.
Correct Answer: B,D 🗳️
Explanation: Only visible for DumpsFree members. You can sign-up / login (it's free).
What are two methods of mitigating MAC address flooding attacks? (Choose two.)
- A. Implement VLAN access maps
- B. Implement private VLANs.
- C. Implement port security.
- D. Implement DHCP snooping.
- E. Place unused ports in a common VLAN.
Correct Answer: A,C 🗳️
Explanation: Only visible for DumpsFree members. You can sign-up / login (it's free).
CORRECT TEXT
Configure the Multilayer Switch so that PCs from VLAN 2 and VLAN 3 can communicate with the Server.
Correct Answer:
mls>enable
mls# configure terminal
mls(config)# int gi0/1
mls(config-if)#no switchport -> not sure about this command line, but you should use this
command if the simulator does not let you assign IP address on Gi0/1 interface.
mls(config-if)# ip address 10.10.10.2 255.255.255.0
mls(config-if)# no shutdown
mls(config-if)# exit
mls(config)# int vlan 2
mls(config-if)# ip address 190.200.250.33 255.255.255.224
mls(config-if)# no shutdown
mls(config-if)# int vlan 3
mls(config-if)# ip address 190.200.250.65 255.255.255.224
mls(config-if)# no shutdown
mls(config-if)#exit
mls(config)#interface gig 0/10
mls(config)#switchport mode access
mls(config)#switchport access vlan 2
mls(config)#no shutdown
mls(config)#exit
mls(config)#interface gig 0/11
mls(config)#switchport mode access
mls(config)#switchport access vlan 3
mls(config)#no shutdown
mls(config)# ip routing (Notice: MLS will not work without this command)
mls(config)# router eigrp 650
mls(config-router)# network 10.10.10.0 0.0.0.255
mls(config-router)# network 190.200.250.32 0.0.0.31
mls(config-router)# network 190.200.250.64 0.0.0.31
NOTE : THE ROUTER IS CORRECTLY CONFIGURED, so you will not miss within it in the exam ,
also don't modify/delete any port just do the above configuration.
in order to complete the lab , you should expect the ping to SERVER to succeed from the MLS ,
and from the PCs as well.
If the above configuration does not work, you should configure EIGRP with "no auto-summary"
command:
no auto-summary
What is a characteristic of a VLAN map that does not contain a match clause?
- A. can only be implemented by the output direction within the VLAN
- B. implicit forward feature at end of list
- C. implicit deny feature at end of list
- D. can only be implemented by the input direction within the VLAN
Correct Answer: B 🗳️
Explanation: Only visible for DumpsFree members. You can sign-up / login (it's free).
A port in a redundant topology is currently in the blocking state and is not receiving BPDUs. To ensure that this port does not erroneously transition to the forwarding state, which command should be configured?
- A. Switch(config-if)#spanning-tree bpduguard
- B. Switch(config)#spanning-tree loopguard default
- C. Switch(config-if)#spanning-tree bdpufilter
- D. Switch(config)#udld aggressive
Correct Answer: B 🗳️
Explanation: Only visible for DumpsFree members. You can sign-up / login (it's free).
William 
Joseph 
Adelaide 
Ursula 
Kerwin 
Lilith 
Sandra 
Dave 
Ivan 
Faithe 
Georgia 
Julian 
Addison 
